Suppressor host guide
Legal first: suppressors are NFA items in the US and are illegal in some states. As of Oct 12, 2026 the federal tax is $0 and ATF has said it will not enforce Form 4 approval or registration for suppressors, but some states still tie legality to federal registration. Check your state first; this page is general information, not legal advice.
Threads
US/Canada T1x barrels are threaded 1/2-28 UNEF; UK and Australia use 1/2-20 UNF (Tikka manual and importers). The manual says a suppressor must seat on the barrel shoulder and must not bottom out on the thread end. See specs.
Ammo
Standard-velocity and subsonic loads keep below the ~1,125 fps supersonic crack Angstadt Arms: suppressed .22 LR ammo; a bolt action doesn't need cycling power, so even very low-velocity loads like CCI Quiet-22 work. Point of impact usually shifts with a can on — re-zero or record the offset (an owner saw about 1 in lower) Rimfire Central T1x ammo thread. More in the ammo guide.
Practical notes
- Check alignment (bore-to-can) before shooting; use a thread protector when the can is off — see barrels & suppressor hosts.
- Rimfire cans foul quickly; follow the can maker's cleaning guidance.
- T1x barrels are not a simple swap (see anatomy).
Choosing a can? See suppressor picks and current NFA status.